Tuesday, August 6, 2013

Building Kitchen Ledge Shelves

A few months after making the floating shelves in our bathroom, I decided to make ledged shelves in our kitchen, so glass items would not fall and plummet to their doom (or mine).  This was when I found Ana White's $10 ledges for the first time, the same plan that inspired the 1x2-thin toddler book ledges I built for my daughter's room more recently.


 We store our glasses on the little shelf next to our refrigerator and our magnetic measurement organizers. I chose the 4 glasses, my daughter has the 4 stainless steel glasses, and my husband selected two deep blue handblown glasses and 2 crystal drink glasses.  The tile work is mostly done, except for the area that hugs around our window sills and the trim I need to install around the edges.  I also need to purchase and screw in the outlet cover behind our tea pot.



Building these shelves did not take long, although choosing the color that would go best did.  I painted them teal, like the inside of our cabinet frames.  I let the teal sit for a month or two, so they were teal when we moved upstairs.  The shadows were not very forgiving for the teal, so I tried silver spray paint on the underside with teal on the top.  Then our kitchen screamed "DINER!" somehow.

I caved in and painted them a black-indigo color called Napoleon, the same paint on our Canvas Floor Cloth, C End Table, and Reclaimed Top Media Console.  :)  I didn't seal the Napoleon in case we changed our mind again, and I've dinged it a few times, letting silvery distressed flecks shine through.  =D We'll keep it!




  • 1x2 @ 6 ft. ($0.60, Re-Use Hawai'i)
  • 1x8 @ 6 ft. ($3.60, Re-Use Hawai'i)
  • 1x4 @ 6 ft. ($1.20, Re-Use Hawai'i)
  • Ryobi 7.5" Miter Saw (already owned)
  • Hitachi cordless drill (already owned)
  • Kreg Jig Jr. Pocket Hole Jig and Drill bit (already owned)
  • 1 1/4" Kreg pocket hole screws (already owned)
  • Measuring tape, pen (already owned)
Here's how we made ours:

The shelves in my kitchen cost me $5.40 out of pocket using reclaimed lumber from a deconstruction warehouse.




I decided to cut 45 degree miters for the inner corners for the corner shelves. 


I left the imperfections of the wood visible, because it is reclaimed and I did not want to hide the fact.

At the time I assembled this shelf, I was playing with my daughter in my mom's downstairs house, so the flooring is different.  :)


I put up tile in the spring time of this year, so we've been using these shelves since the first day we moved upstairs.



Be careful to choose a drill bit only as wide as the inner shaft of the anchor screw, otherwise, the screw tread will have no wood to grip into.


And now we have simple, inexpensive ledge shelves for our kitchen:

Love them!

All our
kitchen
projects

Link Party @
I Heart Naptime // If It's Not Baroque // I Gotta Create // Stone Gable // The Blissful Bee // Lamberts Lately // Ana White, Ten Dollar Ledges



10 comments:

  1. Looks great! The color goes perfectly with your backsplash and counter. I like how you let a little silver spec show through here and there. It gives great character to the piece, and picks up the reflective quality in the counter. Great job!

    ReplyDelete
    Replies
    1. Thank you, Joanne. I love how inexpensive and uncomplicated they were to build and how much more storage space it gives us.

      Delete
  2. These look great! What a fabulous space-saver. This would be great to link up to Create It Thursday #15…it's live now. Hope to see you there!

    ReplyDelete
    Replies
    1. Thank you, Leslie. I am pleased to join Create It Thursday. Thank you for inviting me. :)

      Delete
  3. I'm in love with those splashback tiles. Can you tell me what they are called and where you got them from, pleeeease!

    ReplyDelete
    Replies
    1. Hi, George. :) We bought the tile from Lowes: 12-in x 12-in Silver Metal Wall Tile for about $15 a square foot. It's a ceramic subway tile with thin stainless steel fronts on a mesh backing. We positioned it on the vertical for a variation to the classic subway tile pattern. If you decide to buy it, I strongly advise cutting it with a wet saw. :) Best wishes and please let me know how things turn out!

      Delete
    2. Thank you very much for the info Yvonne. I live in Aus so I will have to import them, but I think it will be worth the effort

      Delete
    3. I hope you could find a comparable product locally! That would be even better. :)

      Delete
  4. Oh and, what a difference something small like rotating the tiles can do!! Champion idea!

    ReplyDelete
    Replies
    1. Thank you, George. I do so appreciate your feedback! =D

      Delete

Let's start a conversation. Seeing comments makes me want to do a jig. I love hearing from you, so please remember to leave your mark here. :)